fbpx

KNOWLEDGE BASE

Webinar Series: Learn how to leverage In-CAD FEA

[vc_row][vc_column animation=”” width=”1/1″][vc_column_text]Autodesk® Nastran® In-CAD software can help you solve engineering challenges directly in your CAD system with our series of webinars in September.

Autodesk Nastran In-CAD software, a general-purpose finite element analysis (FEA) tool for engineers and analysts, offers a range of simulation capabilities powered by the Autodesk Nastran solver.

Join Autodesk Senior Technical Specialist, Matthew McKnight as he demonstrates how In-CAD simulation can improve the design process.

What is In-CAD? Autodesk Nastran In-CAD In this first Autodesk Nastran In-CAD webinar, Matthew McKnight goes over the fundamentals of finite element analysis and how Nastran In-CAD fits into the Autodesk FEA portfolio. The demonstration will also step through the differences between a linear vs non-linear analysis using Autodesk Nastran In-CAD.

Tuesday 8 September 2015 11AM – 12PM AEDT     

How to know if you have a good mesh in Nastran In-CAD In this second Autodesk Nastran In-CAD webinar, Matthew McKnight talks about how to determine if you have a good mesh in Autodesk Nastran In-CAD. Learn how to deal with geometric singularities and how to use different mesh settings to tweak your mesh to meet your needs.

Tuesday 15 September 2015 11AM – 12PM AEDT     

Connecting parts and assemblies in Autodesk Nastran In CAD In this third Autodesk Nastran In-CAD webinar, Matthew McKnight discusses connectors and contact in Nastran In-CAD. Learn about each type of connector and some typical applications of each when working with assemblies. Also discussed are some basics of setting up contacts.

Tuesday 22 September 2015 11AM – 12PM AEDT    

Working with Contact Constraints in Autodesk Nastran In-CAD 2016 In this fourth Autodesk Nastran In-CAD webinar, Matthew McKnight discusses contact settings in Nastran In-CAD. Topics covered include contact settings, differences between contact types, and examples of linear and non-linear contacts.

Tuesday 29 September 2015 11AM – 12PM AEDT    

[/vc_column_text][/vc_column][/vc_row]